Please reach us at info@flourishi.com if you cannot find an answer to your question.
Step 1: Please check if the batteries have been installed properly into the device.
Step 2: Make sure the GPS and Bluetooth of your phone has been turned on.
Step 3: Click the “+” button on top right to start scaning new device.
After the above steps, if the device bluetooth signal still could not be found, please contact Flourishi support. Thanks!
Step 1: Open the app and login.
Step 2: Make sure the GPS and Bluetooth has been turned on. Click the “+” button on top right to start adding new device.
Step 3: The APP will show the available new devices. Select the device which you want to add.
Step 4: Input the device name and select the location to group the devices for easy management.
Step 5: Click the confirmation button to continue.
Step 6: When the device is added, you can choose to set the watering plan now or do it later.
Step 1: On the “All Devices” UI screen, click the device name to pop up the function menu and click “Watering Plan” button.
Step 2: Select the plant category and plant type. If your plant is not listed, you can select a plant of similar kind.
Step 3: Set the pot type, height and diameter or width. For the trunked cone pot, use the diameter at middle height. Select the light condition where the plant will be placed at.
Step 4: The APP shows recommended watering plan. If you want to modify it manually, click on the “Watering Plan” section. Otherwise just click confirm to finish the configuration.
Step 5: Manually change watering frequency or watering strength. Expert can set the numerical volume in ml/time. The next watering date and time can also be set here.
Step 1: On the “All Devices” UI, click the device name to pop up the function menu and click “Watering History” button.
Step 2: Max 10 most recent records will be shown.
Step 1: On the “All Devices” UI, click the device name to pop up the function menu and click “Device name & password” button.
Step 2: Manually change the device name and location.
Step 1: On the “All Devices” UI, click the device name to pop up the function menu and click “Device status” button.
Step 2: “Red cross” sign indicates no connection, out of battery or water. Green sign means working properly.
You can download the APK of the Flourishi Mobile APP for Android OS by clicking the link below. Save the APK file to your phone. Run the file from phone and install the APP by following the instructions on the screen. The APP will be released in Google Play and iOS APP store as soon as we can.
https://drive.google.com/file/d/1V90jySRrmja-wi0ZYEo9M_YTRm8XRlTm/view?usp=sharing
Note:
When you download the file, google may popup following warning message. You can ignore it.
"Google Drive has detected issues with your download. This file is too large for Google to scan for viruses. This file is executable and may harm your computer."
Welcome! Flourishi is now on Indiegogo and the shipment will start soon in October 2023!